UC3845BVNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Frequency | 52kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 25V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 48 % |
| Height | 5.33mm |
| Length | 10.02mm |
| Width | 7.11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3845BVNG Overview
This switching controller fits most application requirements since it is packaged in a 8-DIP (0.300, 7.62mm) package. There is sufficient capacity to generate switching controller for outputs 1. Tube solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 7.6V~30V. Suitable for working in an dc switcher that has a -40°C~105°C TA. Switching can be done at 500kHz with this switching controller. The Through Hole value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 8 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. A search for "UC384*B" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Based on the test statistics, DC regulator outputs voltage 5.1V. A maximum voltage of 25V is accepted by the dc to dc regulator as an input voltage. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 48 %. In most applications and prototypes, DC switcher's Through Hole makes it suitable. The switching controller works at a frequency of 52kHz.
UC3845BVNG Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 52kHz
UC3845BVNG Applications
There are a lot of ON Semiconductor UC3845BVNG DC to DC converter applications.
- Special machining machine tools
- Photovoltaic power
- Sink circuits
- Automatic testing equipment
- Lathes
- Laboratories
- Arc suppression circuits
- Series voltage regulation circuits
- Network technology
- Various precision measuring detectors
