UC3854BDWTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Base Part Number | UC3854 |
| Pin Count | 16 |
| Output Voltage | 7.5V |
| Input Voltage-Nom | 18V |
| Supply Voltage-Max (Vsup) | 20V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 10V |
| Output Current-Max | 1.5A |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 12mA |
| Switcher Configuration | BOOST |
| Output Voltage-Max | 7.6V |
| Output Voltage-Min | 7.4V |
| Mode | Average Current |
| Current - Startup | 250μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3854BDWTRG4 Overview
In a 16-SOIC (0.295, 7.50mm Width) package, it is available.The packaging is Tape & Reel (TR)-shaped.Depending on the device, the mounting type will either be Surface Mount or C.The voltage supply of 10V~20V should be used.A setting of 0°C~70°C has been set on the device.In addition to POWER FACTOR CONTROLLER, the part has other types of ICs.A number of 16 terminals can be found on the device.There is a current of 250μA at startup.This component retains the pin number at 16 even though the pin number has been changed.This device has a number of UC3854 in its best part.16 pins form a sum.Minimum input voltage 10V is needed to operate it.It's a subclass of Switching Regulator or Controllers in a way.20V is its input voltage (Max).When the frequency is 200kHz, it is still able to maintain good accuracy.There is a mountain on the other side of it called Mount Surface Mount.At the most, it works with 1.5A output currentPower is always provided by 18V volts.There must be no more than 12mA amps in a supply, if isup is the maximum supply current.It can be operated with the output of 7.5V.
UC3854BDWTRG4 Features
UC3854BDWTRG4 Applications
There are a lot of Texas Instruments UC3854BDWTRG4 PFC PMICs applications.
- μC power
- Hot swap controller
- Automotive applications
- TVS diodes
- Post DC-DC regulation
- Timing and clock ICs
- Smart manufacturing
- Pumps
- Engine management
- Pressure sensor
