UC3864N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 500kHz |
| Base Part Number | UC3864 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 1.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7V~22V |
| Control Features | Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~500kHz |
| Control Technique | RESONANT CONTROL |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 1 % |
| Duty Cycle (Max) | 100% |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC3864N Overview
In the 16-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. For outputs of 2, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 7V~22V. Qualified to work in an dc switcher with 0°C~70°C TA. This switching controller can switch at 50kHz~500kHz. It is suitable for general dc dc regulator when it is set to Through Hole. To provide efficient switching control, Soft Start is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. 16 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include RESONANT CONTROL. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics will be returned if you search "UC3864". There are a total of 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended to use 8V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 1.7V voltage based on test statistics. The dc dc regulator's usual output current is 500mA, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 1 % during power-up and power-down. Switching controllers work at 500kHz Hz.
UC3864N Features
Transistor Driver Outputs
Switching Frequency: 50kHz~500kHz
Soft Start
RESONANT CONTROL
Max Duty Cycle: 1 %
Frequency: 500kHz
UC3864N Applications
There are a lot of Texas Instruments UC3864N DC to DC converter applications.
- Lathes
- Alternators
- Hydraulic presses
- Automation technology
- Planers
- Surge protection circuits
- Magnetohydrodynamic power
- Automatic plug-in machines
- Wind power
- Various precision measuring detectors
