UC3875DWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UC3875 |
| Pin Count | 28 |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Number of Channels | 4 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Supply Current-Max (Isup) | 30mA |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3875DWP Overview
A ac to dc converter of the package 28-SOIC (0.295, 7.50mm Width) contains the ac to dc converter.You can get it in AC/DC power converter Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at 0°C~70°C TA °C in order to perform.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.The voltage range of the supply can be set to 9.5V~20V (Vcc/Vdd).Total terminations are 28 .There are 28 pins on the ac/dc converter.In this ac-dc converter, there are 28 pins.Surface Mount is the recommended mounting method for the ac dc converters.If you select the UC3875 family, you will be able to search similar acdc converters.AC to DC converter is included in Switching Regulator or Controllers .It has been set to 500mA for the output current.The voltage output by this AC/DC converter is 1.7V .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.In the following link, you will find the REACH SVHC standard: No SVHC .Using this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE is also accessible.In all situations, this AC to DC converter should be set to 12V .A total of 4 channels exist.
UC3875DWP Features
Packaged with 28-SOIC (0.295, 7.50mm Width)
With 28 pins
Output Current at 500mA
With 4 channels on it
UC3875DWP Applications
There are a lot of Texas Instruments UC3875DWP AC DC Converters applications.
- Shaver Charger
- Z-Wave
- AC/DC Adaptors/Chargers for Cordless Phone
- Battery chargers for mobile devices with touchpad display
- Adapter for ADSL
- AC/DC LED Driver applications
- Tablets
- 3.3V power supplies
- Switching AC-DC Adapter
- Air Conditioning
