banner_page

UC3875DWPG4

28 Terminations9.5V~20V 28 Pin UC3875 AC to DC power converter4 Outputs


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UC3875DWPG4
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 281
  • Description: 28 Terminations9.5V~20V 28 Pin UC3875 AC to DC power converter4 Outputs(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Weight 792.000628mg
Operating Temperature 0°C~70°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 28
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE
Subcategory Switching Regulator or Controllers
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 1.27mm
Frequency 1MHz
Base Part Number UC3875
Pin Count 28
Number of Outputs 4
Output Voltage 5.08V
Input Voltage-Nom 12V
Analog IC - Other Type SWITCHING CONTROLLER
Output Current 500mA
Voltage - Supply (Vcc/Vdd) 9.5V~20V
Control Features Frequency Control, Soft Start, Sync
Topology Full-Bridge
Control Mode VOLTAGE-MODE
Control Technique RESONANT CONTROL
Supply Current-Max (Isup) 30mA
Nominal Input Voltage 20V
Switcher Configuration PHASE-SHIFT
Fault Protection Current Limiting
Duty Cycle 100%
Output Isolation Non-Isolated
Voltage - Start Up 10.75V
Height 2.65mm
Length 17.9mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UC3875DWPG4 Overview


In the package 28-SOIC (0.295, 7.50mm Width) , the ac to dc converter is embedded.Tube case is available for the ac dc converter.There is a AC/DC converter mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of 0°C~70°C TA .Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Vcc/Vdd can be used within the range of 9.5V~20V supply voltage.In total, there are 28 terminations.There are 28 pins on this ac/dc converter.A total of 28 pins are present on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.Similar acdc converters can be found using the UC3875 family.There are 4 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 500mA for the output current.There is 5.08V output voltage from this AC/DC converter.When operating at a frequency of 1MHz , AC to DC converter is capable of reaching high efficiency.In the following link, you will find the REACH SVHC standard: No SVHC .In addition to CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE , this ACDC converter can also be used to determine CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE .It is imperative that this AC to DC converter is set to 12V at all times.

UC3875DWPG4 Features


Packaged with 28-SOIC (0.295, 7.50mm Width)
With 28 pins
Output Current at 500mA

UC3875DWPG4 Applications


There are a lot of Texas Instruments UC3875DWPG4 AC DC Converters applications.

  • Battery Chargers
  • Low-Voltage I/O System Power
  • Off--line Battery Charger
  • Auxiliary Power Supply
  • Handheld/Battery-Powered Systems
  • Records
  • Small off-line low voltage power supplies
  • LED lights
  • Utility meters
  • Adapter for ADSL

Write a review

Note: HTML is not translated!
    Bad           Good