UC3875N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UC3875 |
| Pin Count | 20 |
| Output Voltage | 5V |
| Input Voltage-Nom | 12V |
| Number of Channels | 4 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Quiescent Current | 30mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3875N Overview
In the 20-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of 0°C~70°C TA in order to ensure its performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.The voltage range of the supply can be set to 9.5V~20V (Vcc/Vdd).A total of 20 terminations have been recorded.On the ac/dc converter, there are 20 pins.There are a total of 20 pins on the ac-dc converter.Through Hole is the recommended mounting method for the ac dc converters.The UC3875 family allows you to search for similar acdc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .We are setting the output current to 2A .It produces a voltage of 5V .A high efficiency is achieved when operating at a frequency of 1MHz .SVHC for REACH can be found in the standard No SVHC .Using this ACDC converter, it is also possible to identify CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE .Always keep this AC to DC converter set to 12V .A total of 4 channels are available.There is no quiescent current consumption at 30mA .
UC3875N Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 2A
With 4 channels on it
UC3875N Applications
There are a lot of Texas Instruments UC3875N AC DC Converters applications.
- Off--line Battery Charger
- Low power ac?dc Adapters for Chargers
- Air conditioners
- AC--DC Adapter
- LED lights
- Charger
- Automotive Clusters
- Z-Wave
- SMPS house keeping power supplies
- Standby power
