UC3875NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UC3875 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 2.6V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Supply Current-Max (Isup) | 30mA |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3875NG4 Overview
This ac to dc converter is included in the package 20-DIP (0.300, 7.62mm) .The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of 0°C~70°C TA .This AC DC converter employs SWITCHING CONTROLLER analog IC type.It can be used within the range of 9.5V~20V supply voltage (Vcc/Vdd).There have been 20 terminations of this program.The ac/dc converter has 20 pins.In this ac-dc converter, there are 20 pins.There are no problem mounting the ac dc converters by Through Hole .If you select the UC3875 family, you will be able to search similar acdc converters.A total of 4 outputs are to be processed.The ac to dc conversions are contained in Switching Regulator or Controllers .The output current is set to 500mA .It produces a voltage of 2.6V .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .Here is the standard for REACH SVHC : No SVHC .When utilizing this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE can also be discovered.It is important to keep this AC to DC converter set to 12V .
UC3875NG4 Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 500mA
UC3875NG4 Applications
There are a lot of Texas Instruments UC3875NG4 AC DC Converters applications.
- Switching AC-DC Adapter
- Appliance Power Supplies
- Linear Adapter Replacements
- Adapters for Handheld Electronics
- Off--line Battery Charger
- Adapter/Charger for Cell
- Power adapters for monitors
- Tablets
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Small off-line low voltage power supplies
