UCC2305TDWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | HID Lamp Controller |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.6V |
| Terminal Pitch | 1.27mm |
| Frequency | 80kHz~120kHz |
| Base Part Number | UCC2305 |
| Pin Count | 28 |
| Input Voltage-Nom | 6.6V |
| Power Supplies | 6.6V |
| Operating Supply Current | 100μA |
| Topology | Boost, Flyback |
| Min Input Voltage | 5V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.01A |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Dimming | No |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2305TDWRQ1 Overview
Materially packaged in accordance with Tape & Reel (TR)'s specifications.Electronics manufacturers recogni28-SOIC (0.295, 7.50mm Width)e the 28-SOIC (0.295, 7.50mm Width)'s low package cost.PCB Surface Mount is used to mount it.Application types that qualify it as Type HID Lamp Controller include standard grade applications.In order to operate normally, it is supplied with a power supply voltage.-40°C~105°C should always be the default setting.Despite operating at 80kHz~120kHz frequency, it is still accurate.Its best feature consists of a number of UCC2305s.There are 28 terminations on it.It runs in 1 mode.Device 100μA has a 100μA supply current.It remains at 28 for the component's pin number.It has 28 pins total in its sum.In order to keep the component powered at all times, 6.6V is used as a source.The item can be classified into the Switching Regulator or Controllers Subcategory.6.6V supplies are used in the device.A maximum output current of 0.01A can be obtained from it.18V is the only supply voltage that it can function with.It requires a voltage of 5V to function.As a result of its cost-performance ratio, the Automotive, AEC-Q100 Series offers the best value on the market.
UCC2305TDWRQ1 Features
Mounting type of Surface Mount
Supply voltage of 6.6V
Switching Regulator or Controllers subcategory
UCC2305TDWRQ1 Applications
There are a lot of Texas Instruments UCC2305TDWRQ1 Lighting Controllers applications.
- Flashtube ignition
- Spot welding
- Voltage doubling
- To enhance power efficiency
- Motor start
- UPS buffering
- To reduce power noise & signal noise
- DC/DC, DC/AC, and AC/AC converters
- Coupling or blocking
- Decoupling or bypassing
