UCC2541RHBRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Additional Feature | AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC2541 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 7.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Control Features | Enable, Ramp, Reset, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 35V |
| Switcher Configuration | SINGLE |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2541RHBRG4 Overview
Capsuled in the 32-VFQFN Exposed Pad package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). A 8.5V~35V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~105°C TA dc switcher before. Using this switching controller, it is possible to switch at 300kHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable, Ramp, Reset, Soft Start, Tracking which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the QUAD position. A variety of dc switching's functions can be performed on 32 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics can be found by searching "UCC2541". There are 32 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 7.2V. In most cases, the dc dc regulator's output current is 3.5A. This information should be noted when you begin working with the component. Switching controller operates at 1MHz Hz. For better satisfaction, the value of DC to DC voltage regulator is AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE. For nominal working status, the input voltage can be set as 35V.
UCC2541RHBRG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Ramp, Reset, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 1MHz
AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE
UCC2541RHBRG4 Applications
There are a lot of Texas Instruments UCC2541RHBRG4 DC to DC converter applications.
- Ball screw pair
- seismic instrument power circuits
- Telecommunications equipment
- Geothermal power
- Industrial controllers
- Computer rooms
- Sink circuits
- Correction machines
- Wind power
- ATMs
