UCC2541RHBTG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Additional Feature | AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC2541 |
| JESD-30 Code | S-PQCC-N32 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Control Features | Enable, Ramp, Reset, Soft Start, Tracking |
| Input Voltage (Min) | 8.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2541RHBTG4 Overview
In the 32-VFQFN Exposed Pad package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. A 8.5V~35V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~105°C TA is the -40°C~105°C TArm. The switching controller can be switched at 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Ramp, Reset, Soft Start, Tracking. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at QUAD . Various 32 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Searching "UCC2541" will return other relevant dc to dc converter ics. Specially, switching converter corresponds to type Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 8.5V. DC regulator outputs 30V voltage based on test statistics. Voltages 35V are the maximum that the dc to dc regulator will accept. If you start a project, note down the dc dc regulator's usual output current of 3A. DC regulator has a maximum frequency of 1MHz. As a result, DC to DC voltage regulator has a value of AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE so that the need can be met more directly.
UCC2541RHBTG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Ramp, Reset, Soft Start, Tracking
PULSE WIDTH MODULATION
AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE
UCC2541RHBTG4 Applications
There are a lot of Texas Instruments UCC2541RHBTG4 DC to DC converter applications.
- Pipe bending machines
- Shearing machines
- Computed tomography (CT)
- Energy management systems
- Textile machinery
- seismic instrument power circuits
- Production lines
- Solar power plants
- CNC system
- Current source circuits
