UCC25702D

14 Terminals 8.8V~15V 14-Pin UCC25702 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC25702D
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 171
Description: 14 Terminals 8.8V~15V 14-Pin UCC25702 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Weight	122.413241mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	11V
Frequency	700kHz
Base Part Number	UCC25702
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	400mV
Output Type	Transistor Driver
Operating Supply Voltage	14V
Input Voltage-Nom	11V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	750μA
Output Configuration	Positive, Isolation Capable
Output Current	100mA
Voltage - Supply (Vcc/Vdd)	8.8V~15V
Quiescent Current	750μA
Control Features	Current Limit, Frequency Control, Sequencing, Soft Start
Input Voltage (Min)	9.6V
Topology	Boost, Flyback, Forward Converter
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	20ns
Supply Current-Max (Isup)	20mA
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Clock Sync	Yes
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC25702D Overview

In the 14-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). 8.8V~15V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 100kHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Sequencing, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 14 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 11V. Search for "UCC25702" to find other relevant dc to dc converter ics. There are a total of 14 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 9.6V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 400mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. A frequency of 700kHz is used by the switching controller. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 14V. As long as the dc switching is in a dormant state, it utilizes 750μA. Switching controller is necessary to supply a voltage of 11V. It is not recommended to supply more current to the controller than 20mA. The supply current is 750μA.

UCC25702D Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz