UCC25702PW

14 Terminals 8.8V~15V 14-Pin UCC25702 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC25702PW
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 156
Description: 14 Terminals 8.8V~15V 14-Pin UCC25702 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver (Kg)

Details

Tags

Parameters
Frequency - Switching	100kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	20ns
Supply Current-Max (Isup)	20mA
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Clock Sync	Yes
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	58.910309mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	11V
Frequency	700kHz
Base Part Number	UCC25702
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	400mV
Output Type	Transistor Driver
Input Voltage-Nom	11V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	100mA
Voltage - Supply (Vcc/Vdd)	8.8V~15V
Quiescent Current	750μA
Control Features	Current Limit, Frequency Control, Sequencing, Soft Start
Input Voltage (Min)	9.6V
Topology	Boost, Flyback, Forward Converter
Control Mode	VOLTAGE-MODE

UCC25702PW Overview

With a 14-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 8.8V~15V volts and has 8.8V~15V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. This switching controller can switch at 100kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Frequency Control, Sequencing, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 14 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 11V. A search for "UCC25702" will reveal other relevant dc to dc converter ics. 14 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the input voltage of the dc dc voltage regulator be 9.6V. Statistically, the DC regulator outputs 400mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controller operates at 700kHz Hz. DC switching uses 750μA when it is dormant. A supply voltage of 11V is required. Current supplied to the controller should not exceed 20mA.

UCC25702PW Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz