UCC25702PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Frequency | 700kHz |
| Base Part Number | UCC25702 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.8V~15V |
| Control Features | Current Limit, Frequency Control, Sequencing, Soft Start |
| Input Voltage (Min) | 9.6V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 20mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC25702PWG4 Overview
The switching controller fits in the 14-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tube surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.8V~15V. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller can be switched at 100kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Sequencing, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 14 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 11V. Searching "UCC25702" will return other relevant dc to dc converter ics. Switching converter has a total of 14 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. An input voltage of 9.6V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 400mV volts. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controllers operate at 700kHz frequencies. This voltage controller requires a supply voltage of 11V. The controller should not be supplied with more current than 20mA.
UCC25702PWG4 Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz
UCC25702PWG4 Applications
There are a lot of Texas Instruments UCC25702PWG4 DC to DC converter applications.
- Smoke exhaust equipment
- Computer-related products
- Product burn-in
- CMM
- Bending machines
- Scientific testing
- Precision electronic equipment
- Hydro power
- Injection molding machinery
- Smart grid
