UCC25705D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Frequency | 1MHz |
| Base Part Number | UCC25705 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Supply Current-Max (Isup) | 5mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 30V |
| Max Duty Cycle | 93 % |
| Duty Cycle (Max) | 93% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC25705D Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tube. A total of Transistor Driver dc switching's outputs can be handled by it. 8.2V~15V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . 8 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 11V. Search for "UCC25705" to find other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 600mV. You should note down the dc dc regulator's usual output current of 20mA when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 93 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controllers work at 1MHz Hz. You can set the input voltage to 30V for nominal working status. A supply voltage of 11V is required. It is important that the controller is supplied with 5mA more than 5mA volts of current.
UCC25705D Features
Transistor Driver Outputs
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 1MHz
UCC25705D Applications
There are a lot of Texas Instruments UCC25705D DC to DC converter applications.
- Communication system
- Sink circuits
- Digital display device
- Lathes
- Medical monitoring systems
- Electric water heaters
- Imported equipment
- Hydraulic presses
- seismic instrument power circuits
- Automatic testing equipment
