UCC25705DGKTR
| Parameters | |
|---|---|
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Terminal Pitch | 0.65mm |
| Frequency | 4MHz |
| Base Part Number | UCC25705 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 30V |
| Max Duty Cycle | 93 % |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
UCC25705DGKTR Overview
With a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.2V~15V. Suitable for work in a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 1MHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. An array of 8 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input is 11V. Search for "UCC25705" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. Switching converter type is specifically Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 300mV voltage. In most cases, the output current of the dc dc regulator will be 5mA, so note that when you start the project. voltage regulator dc to dcs with a 93 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount qualifies it for most applications and prototypes. 4MHz is the frequency of the switching controller. For nominal working status, the input voltage can be set as 30V. A supply voltage of 11V is required.
UCC25705DGKTR Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 4MHz
UCC25705DGKTR Applications
There are a lot of Texas Instruments UCC25705DGKTR DC to DC converter applications.
- Photovoltaic power
- Electrical distribution systems
- Flaw detection equipment
- Large fire protection systems
- Sensitive electronic devices
- Surge protection circuits
- Die casting equipment
- Electric water heaters
- Handheld GPS
- Television equipment
