UCC25705P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Supply Voltage | 11V |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | UCC25705 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 30V |
| Max Duty Cycle | 93 % |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC25705P Overview
It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.2V~15V. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 1MHz. A generalization of dc dc regulator can be made using Through Hole. For efficient switching control, the dcdc regulator features Current Limit. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . Various 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 11V. Search for "UCC25705" to find other relevant dc to dc converter ics. Switching converter has a total of 8 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 300mV. You should note that the dc dc regulator's usual output current is 5mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 93 %. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 4MHz. It is possible to set the input voltage to 30V for nominal working status. There is a requirement for a 11V supply voltage.
UCC25705P Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 4MHz
UCC25705P Applications
There are a lot of Texas Instruments UCC25705P DC to DC converter applications.
- Balance equipment
- Computer-related products
- Electric water heaters
- Lathes
- Computer application technology
- Experimental setup
- Smoke exhaust equipment
- Refrigerators of central air conditioners
- Elevator lighting
- Printing
