UCC25705PG4
| Parameters | |
|---|---|
| Nominal Input Voltage | 30V |
| Max Duty Cycle | 93 % |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Supply Voltage | 11V |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | UCC25705 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
UCC25705PG4 Overview
The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tube surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 8.2V~15V volts and has 8.2V~15V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller is capable of switching at the 1MHz position. The Through Hole makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 11V. UCC25705 can be used to locate other relevant dc to dc converter ics. There are only 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 300mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 5mA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 93 %. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. There is 4MHz frequency setting on the switching controller. For nominal working status, the input voltage can be set as 30V. The supply voltage must be 11V.
UCC25705PG4 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 4MHz
UCC25705PG4 Applications
There are a lot of Texas Instruments UCC25705PG4 DC to DC converter applications.
- Constant current circuits
- Injection molding machinery
- Smoke prevention equipment
- Current source circuits
- Various precision measuring detectors
- seismic instrument power circuits
- Smart grid
- Industrial robots
- Scientific research
- Electric water heaters
