UCC25706DGK
| Parameters | |
|---|---|
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 11V |
| Terminal Pitch | 0.65mm |
| Frequency | 4MHz |
| Base Part Number | UCC25706 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Topology | Boost, Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 30V |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 93 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
UCC25706DGK Overview
This ac to dc converter is embedded in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .You can get it in AC/DC power converter Tube .A AC/DC converter of this type is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ in order to ensure its performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.In this AC to DC transformer, the switching frequency is 1MHz .Within the range of 8V~15V supply voltage (Vcc/Vdd), it can be used.As a result, it has had 8 terminations.It contains 8 pins.The pins of the ac-dc converter total to 8 .It is suitable for mounting by Surface Mount .A similar acdc converter can be searched by using the UCC25706 family.The number of outputs to run is 1 .Switching Regulator or Controllers contains the ac to dc conversions.The output current is set to 5mA .Its output voltage amounts to 300mV .AC to DC converter reaches high efficiency when operated at a frequency of 4MHz .Keep in mind that this AC to DC converter should always be set to 11V .
UCC25706DGK Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at 1MHz
With 8 pins
Output Current at 5mA
UCC25706DGK Applications
There are a lot of Texas Instruments UCC25706DGK AC DC Converters applications.
- ATX/BTX Auxiliary Power
- Battery chargers for cordless
- Standby power supplies for TV
- Laptops and personal digital assistants
- Off--line Battery Charger
- Home Appliance Applications
- Power adapters for network devices
- Switching AC-DC Charger
- Digital cameras
- Remotely-controlled appliances
