UCC2580D-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~15V |
| Quiescent Current | 2.5mA |
| Control Features | Soft Start |
| Input Voltage (Min) | 10V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Supply Current-Max (Isup) | 3.5mA |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | BOOST |
| Internal Switch(s) | No |
| Max Duty Cycle | 69 % |
| Switching Frequency | 430kHz |
| Duty Cycle | 66% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2580D-4 Overview
This ac to dc converter is embedded in package 16-SOIC (0.154, 3.90mm Width) .In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -55°C~150°C TJ degrees Celsius.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 8.5V~15V , the AC/DC converter may be used.In total, it has 16 terminations.On the ac/dc converter, there are 16 pins.Surface Mount is a suitable mounting point for the ac dc converters.It is possible to search for similar acdc converters by using the UCC2580 family.AC to DC converter is necessary to run 2 outputs.Switching Regulator or Controllers includes the ac to dc conversions.In this AC to DC transformer, the output current is set to 100mA .It produces a voltage of 400mV .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .It is possible to ensure a maximum value of 14V for the input voltage using a unique technique.This AC to DC converter should always be set to 12V .When set to 2.5mA , AC to DC converter consumes quiescent current.
UCC2580D-4 Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
With 16 pins
Output Current at 100mA
UCC2580D-4 Applications
There are a lot of Texas Instruments UCC2580D-4 AC DC Converters applications.
- Rice Cooker
- Automotive Infotainment
- Battery chargers for cordless
- Home appliances
- Small off-line low voltage power supplies
- Standby power supplies for TV
- AC?DC USB chargers for Cell Phones
- Laptops
- LED Driver
- SMPS house keeping power supplies
