UCC2580DTR-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~15V |
| Control Features | Soft Start |
| Input Voltage (Min) | 10V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Supply Current-Max (Isup) | 3.5mA |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | BOOST |
| Internal Switch(s) | No |
| Max Duty Cycle | 69 % |
| Switching Frequency | 430kHz |
| Duty Cycle | 66% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2580DTR-4 Overview
This ac to dc converter is included in the package 16-SOIC (0.154, 3.90mm Width) .The ac dc converter is available in Tape & Reel (TR) case.There is a AC/DC converter mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The voltage range of the supply can be set to 8.5V~15V (Vcc/Vdd).It has a total of 16 terminations.It contains 16 pins.There are a total of 16 pins on the ac-dc converter.Suitable mounting is provided by Surface Mount .Similar acdc converters can be found using the UCC2580 family.Running 2 outputs is available.The following ac to dc conversions are contained in Switching Regulator or Controllers .The output current is set to 100mA .As a result, its output voltage is 400mV .When operating at a frequency of 1MHz , AC to DC converter is capable of reaching high efficiency.Using a unique technique, a voltage with a maximum value of 14V can be ensured.It is important to keep this AC to DC converter set to 12V .
UCC2580DTR-4 Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
With 16 pins
Output Current at 100mA
UCC2580DTR-4 Applications
There are a lot of Texas Instruments UCC2580DTR-4 AC DC Converters applications.
- Consumer electronics
- Dimmers
- Standby Power Supply
- Humidifier
- USB type-c v1.2 chargers with optional VDM
- Lighting controls
- IoT Applications
- Cleaners
- AC?DC USB chargers for Tablets
- Battery chargers for cordless
