UCC2580N-1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 69 % |
| Duty Cycle (Max) | 66% |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2580N-1 Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 2 input. A solid enclosure of Tube surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8.5V~16V and has a 8.5V~16V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 400kHz . A generalization of dc dc regulator can be made using Through Hole. Enable, Ramp, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. UCC2580 can be searched for other relevant dc to dc converter ics. 16 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, DC regulator outputs 400mV volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 69 %. In most applications and prototypes, DC switcher's Through Hole makes it suitable. A frequency of 1MHz is used by the switching controller. In a dormant state, the dc switching uses 2.5mA.
UCC2580N-1 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz
UCC2580N-1 Applications
There are a lot of Texas Instruments UCC2580N-1 DC to DC converter applications.
- Digital display device
- Current source circuits
- Scientific research
- Digital video recorders
- Handheld GPS
- Gear/thread machining machines
- Elevator lighting
- Hydraulic presses
- Printing
- Photovoltaic power
