UCC2580N-1G4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Control Features | Enable, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 69 % |
| Duty Cycle (Max) | 66% |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2580N-1G4 Overview
It comes in a 16-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 8.5V~16V. Worked in an dc switcher with a -40°C~85°C TA rating. This switching controller can switch at 400kHz. The Through Hole allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable, Ramp, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics can be found by searching "UCC2580". The switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. DC regulator outputs 400mV voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. A duty cycle set at 69 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Through Hole makes DC switcher suitable for most application and prototype designs. Switching controller operates at 1MHz Hz.
UCC2580N-1G4 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz
UCC2580N-1G4 Applications
There are a lot of Texas Instruments UCC2580N-1G4 DC to DC converter applications.
- Electric heating, lighting
- Program control systems
- Mobile phones
- Die casting equipment
- Shearing machines
- Surge protection circuits
- Laboratories
- Gear/thread machining machines
- Automation technology
- Balance equipment
