UCC2580N-2G4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~15V |
| Control Features | Soft Start |
| Input Voltage (Min) | 10V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Max Duty Cycle | 69 % |
| Switching Frequency | 430kHz |
| Duty Cycle | 66% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2580N-2G4 Overview
It is embedded in package 16-DIP (0.300, 7.62mm) .In Tube case, the ac dc converter is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -55°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.Supply voltage (Vcc/Vdd) does not need to exceed 8.5V~15V .There are a total of 16 terminations.It contains 16 pins.The ac-dc converter has 16 pins.It are possible to mount thare ac dc converters by Through Hole .It is possible to search for similar acdc converters by using the UCC2580 family.The number of outputs to run is 2 .The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 100mA for the output current.The voltage output by this AC/DC converter is 400mV .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .It is possible to ensure a maximum value of 14V for the input voltage using a unique technique.
UCC2580N-2G4 Features
Packaged with 16-DIP (0.300, 7.62mm)
With 16 pins
Output Current at 100mA
UCC2580N-2G4 Applications
There are a lot of Texas Instruments UCC2580N-2G4 AC DC Converters applications.
- Battery chargers for mobile devices with touchpad display
- SMPS house keeping power supplies
- MPS parts
- ZigBee
- Standby power supplies for IR
- Power Adaptors
- Power adapters for monitors
- Battery chargers for media tablets
- Chargers for cell/cordless phones
- Low power ac?dc Adapters for Chargers
