UCC2580N-3
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Control Features | Enable, Ramp, Soft Start |
| Topology | Forward Converter |
| Frequency - Switching | 400kHz |
| Synchronous Rectifier | No |
| Duty Cycle (Max) | 66% |
| Clock Sync | No |
| Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
UCC2580N-3 Overview
With its 16-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 8.5V~16V volts and has 8.5V~16V supply voltage. Suitable for work in a -40°C~85°C TA dc switcher. It can switch at 400kHz. The Through Hole makes it ideal for general dc dc regulator. To provide efficient switching control, Enable, Ramp, Soft Start is included in the dcdc regulator. There is 16-PDIP dc dc controller package associated with this part.
UCC2580N-3 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
UCC2580N-3 Applications
There are a lot of Rochester Electronics, LLC UCC2580N-3 DC to DC converter applications.
- Grinders
- Handheld GPS
- Automatic testing equipment
- Boring machines
- Printing
- Balance equipment
- Remotely powered electric motors
- Household control circuits
- Motor controller circuits
- Laboratories
