UCC2580N-3
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 69 % |
| Duty Cycle (Max) | 66% |
| Output Phases | 1 |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2580N-3 Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. Tube solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 8.5V~16V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 400kHz. Through Hole makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Ramp, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 16. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "UCC2580". There are a total of 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 400mV voltage based on test statistics. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 69 %. Having a Through Hole makes DC switcher ideal for most prototype and application designs. Switching controller operates at 1MHz Hz. When the dc switching is dormant, it uses 2.5mA.
UCC2580N-3 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz
UCC2580N-3 Applications
There are a lot of Texas Instruments UCC2580N-3 DC to DC converter applications.
- Ball screw pair
- Industrial robots
- Motor controller circuits
- Mobile phones
- Television equipment
- Communication system
- seismic instrument power circuits
- Pipe bending machines
- Die casting equipment
- Flaw detection equipment
