UCC2585M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | UCC2585 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 6.3V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 485kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2585M Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 3V~5.5V and has a 3V~5.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. There is a switch at 500kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 3.3V. Searching "UCC2585" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 3V. The test statistics indicate that DC regulator outputs a voltage of 900mV. The dc to dc regulator can only accept 6.3V input voltage. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator has a maximum frequency of 485kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 5V. 1A is the greatest value switching converter outputs as current.
UCC2585M Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
UCC2585M Applications
There are a lot of Texas Instruments UCC2585M DC to DC converter applications.
- Imported equipment
- Current source circuits
- Motor controller circuits
- Handheld GPS
- Cutting machine tools
- Various precision measuring instruments
- Digital video recorders
- Precision electronic equipment
- Large fire protection systems
- Medical monitoring systems
