UCC27200AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.3W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27200 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Power Dissipation | 1.3W |
| Output Current | 3A |
| Max Supply Current | 4mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Turn On Time | 0.007 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Turn Off Time | 0.007 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27200AD Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tube represents the package.Surface Mount is mounted in the way.WGate driversh a 8V~17V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~140°C TJ.Input type of Non-Inverting is used.The configuration starts with 8 terminations.Many related parts can be found under its base part number UCC27200.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.The maximum output current can amount to 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 8 component pins.A high-side voltage can be set up to 120V (Bootstrap).For its basis, 2 outputs are integrated.Mosfet driver supports an output current of 3A.Its maximum power dissipation of 1.3W shows its power loss capacity without overheating.To increase stability, keep the supply current at 4mA.A voltage of 12V should be set for the operating supply voltage.
UCC27200AD Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 1.3W
UCC27200AD Applications
There are a lot of Texas Instruments UCC27200AD gate drivers applications.
- Portable Media Players
- serial peripheral interface (SPI), I2C
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for controller area network (CAN),
- Motor Control
- High-voltage isolated DC-DC converters
- Isolated Supplies for Motor Control
- Isolated switch mode power supplies (SMPS)
- Line drivers
