UCC27200ADRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, 9 Leads |
| Number of Pins | 9 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 9 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 2.86W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC27200 |
| Pin Count | 9 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Max Supply Current | 4mA |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27200ADRCR Overview
Its 10-VFDFN Exposed Pad, 9 Leads package provides greater flexibility.Tape & Reel (TR) is the form of the package.Surface Mount is mounted in the way.A supply voltage of 8V~17V demonstrates its superiority.There is a gate type of N-Channel MOSFET in this design.Temperature range -40°C~140°C TJ is allowed for this device.Non-Inverting is used as the input type in this program.9 terminations constitute its foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UCC27200.In this case, Surface Mount indicates how the device is mounted.Devices have 9 pins available.A voltage of 12V is required for its operation.In the maximum case, the output current can be 3A volts.There are 9 component pins on the board.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 120V.The basis of this system consists of 2 outputs.Using 2.86W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To maintain higher stability, the supply current should always be 4mA.
UCC27200ADRCR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
9 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.86W
UCC27200ADRCR Applications
There are a lot of Texas Instruments UCC27200ADRCR gate drivers applications.
- DC/DC converters
- Head-up and Head mounted displays
- PCMCIA applications
- Motor Control
- Motor Drives
- Active filtering
- Uninterruptible Power Supplies (UPS)
- Dual-Battery Systems
- Portable Navigation Devices
- Line drivers
