UCC27200ADRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, 9 Leads |
| Number of Pins | 9 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 9 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 2.86W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC27200 |
| Pin Count | 9 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Max Supply Current | 800μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27200ADRCT Overview
Gate drivers provides greater flexibilGate driversy to use the 10-VFDFN Exposed Pad, 9 Leads package.Tape & Reel (TR) is the packaging method.In this case, gate drivers is mounted along the way of Surface Mount.WGate driversh a 8V~17V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET is used in its design.Temperature range -40°C~140°C TJ is allowed for this device.The input type is Non-Inverting.Its configuration is based on a total of 9 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27200.You mount it with Surface Mount.Mosfet driver is configured wMosfet driverh 9 pins when designing.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.The maximum output current can amount to 3A.9 pins are present on the component.A high-side voltage can be set up to 120V (Bootstrap).For its basis, 2 outputs are integrated.2.86W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.For higher stability, the supply current should be kept at 800μA.
UCC27200ADRCT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
9 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.86W
UCC27200ADRCT Applications
There are a lot of Texas Instruments UCC27200ADRCT gate drivers applications.
- Motor Controls
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High frequency line drivers
- General Purpose 3-Phase Inverter
- LCD/LCoS/DLP portable and embedded pico projectors
- Smart Phones
- Portable Navigation Devices
- Industrial Power Supplies
- Motor Drives
- Commercial and agricultural vehicles (CAV)
