UCC27200ADRMT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3.3W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27200 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Power Dissipation | 3.3W |
| Output Current | 3A |
| Max Supply Current | 4mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27200ADRMT Overview
For greater flexibility, the 8-VDFN Exposed Pad package is adopted.Tape & Reel (TR) is the form of the package.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a power supply voltage of 8V~17V V, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Mosfet driver accepts input of type Non-Inverting.There are 8 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UCC27200.The device is mounted with Surface Mount.There are 8 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.In the maximum case, the output current can be 3A volts.This subcategory of MOSFET Drivers has a number of useful electronic components.On the board, there are 8 component pins.Max (Bootstrap) can be as high as 120V.The basis of the model has 2 outputs integrated.This device supports a current output of 3A at the output.Based on its maximum power dissipation of 3.3W, it is clear that it is capable of transferring and conducting power loss without overheating.To maintain higher stability, the supply current should always be 4mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
UCC27200ADRMT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 3.3W
UCC27200ADRMT Applications
There are a lot of Texas Instruments UCC27200ADRMT gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- High-speed communications
- Industrial Power Supplies
- Multicolor LED/laser displays
- Commercial and agricultural vehicles (CAV)
- PCMCIA applications
- Industrial motor drives - compact, standard, premium, servo drives
- Motor controllers
- Pulse transformer drivers
- Portable computers
