UCC27200DDAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.7W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC27200 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 2.7W |
| Output Current | 3A |
| Max Supply Current | 4mA |
| Propagation Delay | 20 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27200DDAR Overview
The 8-PowerSOIC (0.154, 3.90mm Width) package offers greater flexibility.A package of Tape & Reel (TR) has been used.Its recommended mounting way is Surface Mount.In the absence of a 8V~17V supply voltage, it can demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.Temperature range -40°C~140°C TJ is allowed for this device.Input type of Non-Inverting is used.8 terminations constitute its foundation.The base part number UCC27200 refers to a number of related parts.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.The device is specifically designed to operate at 12V volts.The maximum output current can amount to 3A.This subcategory of MOSFET Drivers has a number of useful electronic components.There are 8 component pins on the board.A boot strap voltage of 120V is the maximum possible high-side voltage.The basis of this system consists of 2 outputs.The output current supported by the device is 3A.This device has a maximum power dissipation of 2.7W, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 4mA.Setting the operating supply voltage to 12V is recommended.By using 1MHz frequency, efficiency can be increased.
UCC27200DDAR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W
UCC27200DDAR Applications
There are a lot of Texas Instruments UCC27200DDAR gate drivers applications.
- Line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Gate Driver Supplies
- General Purpose 3-Phase Inverter
- High current laser/LED systems
- Telecom switch mode power supplies
- Multicolor LED/laser displays
- Pulse transformer drivers
- White Goods - Air Conditioner, Washing Machine,
