UCC27200DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 140°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 8V |
| Power Dissipation-Max | 1.3W |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1.3W |
| Max Supply Current | 4mA |
| Current - Output | 3A |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Output Peak Current Limit-Nom | 3A |
| Built-in Protections | UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC27200DG4 Overview
A higher level of flexibility is provided by its SOIC package.Rail/Tube represents the package.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Devices are mounted by Surface Mount.When the device is designed, it has 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.The interface chip of the system is HALF BRIDGE BASED PERIPHERAL DRIVER.Mosfet driver is possible to achieve a maximum output current of 3A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has 8 component pins.There are 2 outputs integrated for its basis.Temperatures greater than 140°C are not allowed.Operating temperatures must not exceed -40°C.The supply current should be kept at 4mA to ensure higher stability.The maximum voltage for operation is 17V.In order for the device to operate, a supply voltage of 8V must be applied.In this case, the current output is 3A.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.The frequency of 1MHz can improve efficiency.
UCC27200DG4 Features
Embedded in the Rail/Tube package
8 pins
UCC27200DG4 Applications
There are a lot of Texas Instruments UCC27200DG4 gate drivers applications.
- Refrigerator
- White Goods - Air Conditioner, Washing Machine,
- Commercial air-conditioning (CAC)
- Solar inverters
- General Purpose 3-Phase Inverter
- Head-up and Head mounted displays
- Pulse transformer drivers
- AC-DC Inverters
- Isolated Gate Driver Supplies
- Digitally controlled power supplies
