UCC27200DRMT
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3.3W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC27200 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3mA |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 3.3W |
| Output Current | 3A |
| Max Supply Current | 4mA |
| Propagation Delay | 20 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
UCC27200DRMT Overview
The 8-VDFN Exposed Pad package offers greater flexibility.The packaging method is indicated by Tape & Reel (TR).It's mounted on the way to Surface Mount.When the supply voltage is 8V~17V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Non-Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 8 terminations.There are numerous related parts listed under its base part number UCC27200.Mosfet driver is mounted using the Surface Mount method.Devices have 8 pins available.A voltage of 12V is required for its operation.In the maximum case, the output current can be limited to 3mA.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Components with 8 pins are available.A high-side voltage can be set up to 120V (Bootstrap).For its basis, 2 outputs are integrated.The output current supported by the device is 3A.Its maximum power dissipation of 3.3W also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended to keep the supply current at 4mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V.A frequency of 1MHz can improve efficiency.
UCC27200DRMT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 3.3W
UCC27200DRMT Applications
There are a lot of Texas Instruments UCC27200DRMT gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Automotive Applications
- High-speed communications
- Motor controllers
- AC-DC Inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- UPS systems
- Topologies
- RGB applications
- Uninterruptible Power Supplies (UPS)
