UCC27201ADDAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.7W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 250mV |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 3.8mA |
| Power Dissipation | 2.7W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Turn On Time | 0.007 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.007 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201ADDAR Overview
A higher degree of flexibility is achieved by adopting its 8-PowerSOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is used.Surface Mount is mounted in the way.In the absence of a 8V~17V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.For this device, the temperature range is -40°C~140°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number UCC27201.In this case, Surface Mount indicates how the device is to be mounted.When the device is designed, it has 8 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.In the maximum case, the output current can be limited to 3A.This subcategory of MOSFET Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.Maximum (Bootstrap) voltage can be up to 120V.There are 2 outputs integrated for its basis.The output current supported by the device is 3A.Its maximum power dissipation of 2.7W shows its power loss capacity without overheating.To increase stability, keep the supply current at 5.5mA.In this case, it produces a voltage of 250mV.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
UCC27201ADDAR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W
UCC27201ADDAR Applications
There are a lot of Texas Instruments UCC27201ADDAR gate drivers applications.
- Head-up and Head mounted displays
- serial peripheral interface (SPI), I2C
- RGB applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Commercial and agricultural vehicles (CAV)
- Solar power supplies
- White Goods - Air Conditioner, Washing Machine,
- Isolated Supplies for Motor Control
- Motor Control
- Motor Controls
