UCC27201ADPRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | HTTP://WWW.TI.COM/LIT/ML/MPSS046A/MPSS046A.PDF |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.3W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | UCC27201 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 3A |
| Power Dissipation | 1.3W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Turn On Time | 0.007 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.007 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201ADPRT Overview
In order to increase flexibility, the package 10-WDFN Exposed Pad is used.A packaging method of Tape & Reel (TR) is indicated.Its recommended mounting way is Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 8V~17V.N-Channel MOSFET is the gate type used for this design.There is a temperature range for this device of -40°C~140°C TJ.Non-Inverting is used as the input type in this program.Mosfet driver consists of 10 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UCC27201.The mount method is Surface Mount.The pins are configured with 10 when designing the chip.The device is specifically designed to function with a supply voltage of 12V V.3A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.Components with 10 pins are available.High-side voltage - Max (Bootstrap) can be as low as 120V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current can be set to 3A.Its maximum power dissipation of 1.3W shows its power loss capacity without overheating.To increase stability, keep the supply current at 5.5mA.In order to operate properly, the operating supply voltage should be set to 12V.Mosfet gate drivers is also possible to provide HTTP://WWW.TI.COM/LIT/ML/MPSS046A/MPSS046A.PDF using unique technologies.
UCC27201ADPRT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 1.3W
HTTP://WWW.TI.COM/LIT/ML/MPSS046A/MPSS046A.PDF
UCC27201ADPRT Applications
There are a lot of Texas Instruments UCC27201ADPRT gate drivers applications.
- Topologies
- Motor Controls
- DC/DC converters
- Motor Control
- Refrigerator
- Isolated Supplies for Motor Control
- Commercial air-conditioning (CAC)
- serial peripheral interface (SPI), I2C
- RGB applications
- High power buffers
