UCC27201ADRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, 9 Leads |
| Number of Pins | 9 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 9 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.86W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | UCC27201 |
| Pin Count | 9 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Power Dissipation | 2.86W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 20 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201ADRCR Overview
Gate drivers provides greater flexibilGate driversy to use the 10-VFDFN Exposed Pad, 9 Leads package.There is a package in the form of Tape & Reel (TR).Surface Mount is mounted in the way.When the supply voltage is 8V~17V it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 9 terminations.You will find various related parts under the base part number UCC27201.The device is mounted with Surface Mount.In the device, there are 9 pins.This device operates with 12V supply voltage.Mosfet driver is possible to achieve a maximum output current of 3A.There are several useful electronic components found in its subcategory of MOSFET Drivers.Components with 9 pins are available.Maximum (Bootstrap) voltage can be up to 120V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers can deliver a current of 3A.The maximum power dissipation of 2.86W shows its maximum capability to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 5.5mA.Setting the operating supply voltage to 12V is recommended.
UCC27201ADRCR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
9 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.86W
UCC27201ADRCR Applications
There are a lot of Texas Instruments UCC27201ADRCR gate drivers applications.
- Power factor correction (PFC) circuits
- A/D drivers
- Portable computers
- Industrial Modules
- Motor controllers
- serial peripheral interface (SPI), I2C
- Video amplifiers
- High power buffers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Active Clamp Flyback or Forward and Synchronous Rectifier
