UCC27201ADRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, 9 Leads |
| Number of Pins | 9 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 9 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.86W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | UCC27201 |
| Pin Count | 9 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Power Dissipation | 2.86W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 20 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201ADRCT Overview
In order to increase flexibility, the package 10-VFDFN Exposed Pad, 9 Leads is used.A packaging method of Tape & Reel (TR) is indicated.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 8V~17V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.-40°C~140°C TJ is the allowed temperature range for this device.The input type is Non-Inverting.There are 9 terminations to form the base of its configuration.There are various related parts under its base part number UCC27201.In this case, Surface Mount indicates how the device is to be mounted.During design, it is configured with 9 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.There is an output current limit of 3A for this device.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 9.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 120V.For its basis, 2 outputs are integrated.This device is capable of delivering 3A current.This device has a maximum power dissipation of 2.86W, indicating that it is capable of reducing power loss without overheating.The supply current should be kept at 5.5mA to ensure higher stability.A voltage of 12V should be set for the operating supply voltage.
UCC27201ADRCT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
9 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.86W
UCC27201ADRCT Applications
There are a lot of Texas Instruments UCC27201ADRCT gate drivers applications.
- High frequency line drivers
- RGB applications
- UPS systems
- Portable computers
- A/D drivers
- High current laser/LED systems
- Automotive Applications
- Power factor correction (PFC) circuits
- Smart Phones
- High-speed communications
