UCC27201ADRMR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3.3W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 3A |
| Power Dissipation | 3.3W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Turn On Time | 0.007 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.007 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201ADRMR Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.Tape & Reel (TR) represents the packaging method.Surface Mount is mounted in the way of the device.By using 8V~17V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.A type of Non-Inverting is used for input in this program.Initially, the configuration is composed of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27201.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.In the maximum case, the output current can be 3A volts.There are several useful electronic components found in its subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.A boot strap voltage of 120V is the maximum possible high-side voltage.For its basis, 2 outputs are integrated.An output current of 3A is supported.3.3W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.If you want a stable supply current, you should keep it at 5.5mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
UCC27201ADRMR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 3.3W
UCC27201ADRMR Applications
There are a lot of Texas Instruments UCC27201ADRMR gate drivers applications.
- Portable Media Players
- Industrial Motor Inverter - Power Tools, Robotics
- High frequency line drivers
- Video amplifiers
- Dual-Battery Systems
- Motor Control
- Smart Phones
- Solar inverters
- 3-Phase Motor Inverter Driver
- Industrial Power Supplies
