UCC27201ADRMT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3.3W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 3A |
| Power Dissipation | 3.3W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Turn On Time | 0.007 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.007 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201ADRMT Overview
A higher level of flexibility is provided by its 8-VDFN Exposed Pad package.Gate drivers is packaged in the way of Cut Tape (CT).In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 8V~17V supply voltage.A gate type of N-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~140°C TJ.A type of Non-Inverting is used for input in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various related parts under its base part number UCC27201.Surface Mount is the way it takes to mount the device.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to operate at 12V volts.As a maximum, there is 3A limit to the output current.Within this subcategory of MOSFET Drivers, there are several useful electronic components.On the board, there are 8 component pins.Ideally, the high-side voltage should not exceed 120V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers can deliver a current of 3A.3.3W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.As a precaution, make sure the supply current is kept at 5.5mA.During the operation of the system, the voltage of the operating supply should be set to 12V.
UCC27201ADRMT Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 3.3W
UCC27201ADRMT Applications
There are a lot of Texas Instruments UCC27201ADRMT gate drivers applications.
- Telecom switch mode power supplies
- Solar inverters
- Motor controllers
- High current laser/LED systems
- A/D drivers
- Portable computers
- Industrial Power Supplies
- Automotive Applications
- Welding
- Isolated Gate Driver Supplies
