UCC27201AQDMKRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | UCC27201 |
| Max Output Current | 3A |
| Supply Current-Max | 5.5mA |
| Input Type | Non-Inverting |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.45 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.45 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201AQDMKRQ1 Overview
The 10-VDFN Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is used.For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is set to 8V~17V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Non-Inverting is used as its input type.Mosfet driver is based on 10 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27201.You mount it with Surface Mount.When designing, the device is configured with 10 pins.A voltage of 12V is required for its operation.There is a maximum output current of 3A.Max (Bootstrap) can be as high as 120V.Gate drivers in this series are included in the Automotive, AEC-Q100 series.When operating, the supply current cannot exceed 5.5mA.
UCC27201AQDMKRQ1 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 120V
Operating with the supply voltage of Automotive, AEC-Q100
UCC27201AQDMKRQ1 Applications
There are a lot of Texas Instruments UCC27201AQDMKRQ1 gate drivers applications.
- Broadcast equipment
- PCMCIA applications
- Isolated switch mode power supplies (SMPS)
- RGB applications
- High current laser/LED systems
- Commercial and agricultural vehicles (CAV)
- serial peripheral interface (SPI), I2C
- Video amplifiers
- Solar inverters
- Power factor correction (PFC) circuits
