UCC27201DDAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.7W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3mA |
| Operating Supply Voltage | 12V |
| Operating Supply Current | 5.5mA |
| Power Dissipation | 2.7W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 20 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201DDAR Overview
A higher level of flexibility is provided by its 8-PowerSOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tape & Reel (TR).Its recommended mounting way is Surface Mount.In the absence of a 8V~17V supply voltage, its superiority can be demonstrated.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.The input type is Non-Inverting.8 terminations constitute its foundation.Numerous related parts are available for its base part number UCC27201.Mosfet driver is mounted using the Surface Mount method.Mosfet driver is configured wMosfet driverh 8 pins when designing.In addition, it is specifically designed to operate with a supply voltage of 12V.As a maximum, there is 3mA limit to the output current.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has 8 component pins.Max (Bootstrap) can be as high as 120V.The basis of this system consists of 2 outputs.Mosfet driver supports an output current of 3A.Based on the maximum power dissipation of 2.7W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To increase stability, keep the supply current at 5.5mA.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 12V.The device operates on a voltage of 5.5mA as the supply voltage.The frequency of 1MHz can be used to improve efficiency.
UCC27201DDAR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W
UCC27201DDAR Applications
There are a lot of Texas Instruments UCC27201DDAR gate drivers applications.
- General Purpose 3-Phase Inverter
- White Goods - Air Conditioner, Washing Machine,
- Portable Navigation Devices
- High-speed communications
- Smart Phones
- Portable Media Players
- High frequency line drivers
- Isolated Supplies for Motor Control
- Isolated Gate Driver Supplies
- Broadcast equipment
