UCC27201DDARG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 140°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Pin Count | 8 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 8V |
| Power Dissipation-Max | 2.7W |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 2.7W |
| Max Supply Current | 5.5mA |
| Current - Output | 3A |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Built-in Protections | UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
UCC27201DDARG4 Overview
A higher degree of flexibility is achieved by adopting its SOIC package.A packaging method of Tape and Reel is indicated.The configuration is supported by 2 drivers.There are 8 terminations to form the base of its configuration.Mosfet driver is mounted using the Surface Mount method.When the device is designed, it has 8 pins.With a supply voltage of 12V, it is designed to operate.In this case, HALF BRIDGE BASED PERIPHERAL DRIVER serves as the interface IC.As a maximum, there is 3A limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 8.There is a maximum operating temperature of 140°C.Minimum operating temperatures are allowed to be -40°C.Mosfet gate drivers is recommended to keep the supply current at 5.5mA to ensure greater stabilMosfet gate driversy.17V is its maximum operating voltage.A minimum supply voltage of 8V is required for operation.Mosfet gate drivers outputs a current of 3A at the moment.The operating supply voltage should be set at 12V.The frequency of 1MHz can be adjusted in order to improve efficiency.
UCC27201DDARG4 Features
Embedded in the Tape and Reel package
2 drivers
8 pins
UCC27201DDARG4 Applications
There are a lot of Texas Instruments UCC27201DDARG4 gate drivers applications.
- Portable computers
- Line drivers
- Motor controllers
- Portable Media Players
- Topologies
- 3-Phase Motor Inverter Driver
- General Purpose 3-Phase Inverter
- Automotive Applications
- LCD/LCoS/DLP portable and embedded pico projectors
- White Goods - Air Conditioner, Washing Machine,
