UCC27201DRMR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3.3W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 3.3W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 20 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201DRMR Overview
For greater flexibility, the 8-VDFN Exposed Pad package is adopted.The packaging method is indicated by Tape & Reel (TR).Surface Mount is mounted in the way.When the supply voltage is set to 8V~17V, it can demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Non-Inverting is used as the input type in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number UCC27201.The device is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.This device operates with 12V supply voltage.In the maximum case, the output current can be 3A volts.Its subcategory of MOSFET Drivers contains various useful electronic components.A board with 8 component pins is available.Max (Bootstrap) can be as high as 120V.The basis has 2 integrated outputs.Mosfet driver supports an output current of 3A.The maximum power dissipation of 3.3W shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 5.5mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers is recommended that you set the operating supply voltage to 12V.The frequency of 1MHz can result in an improvement in efficiency.
UCC27201DRMR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 3.3W
UCC27201DRMR Applications
There are a lot of Texas Instruments UCC27201DRMR gate drivers applications.
- RGB applications
- Line drivers
- Automotive Applications
- Uninterruptible Power Supplies (UPS)
- Multicolor LED/laser displays
- White Goods - Air Conditioner, Washing Machine,
- High frequency line drivers
- Solar power supplies
- Isolated Supplies for Motor Control
- Isolated Gate Driver Supplies
