UCC27201DRMT
| Parameters | |
|---|---|
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3.3W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 3.3W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
| Propagation Delay | 20 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
UCC27201DRMT Overview
Its 8-VDFN Exposed Pad package is adopted for higher flexibility.There is a package in the form of Tape & Reel (TR).It's mounted on the way to Surface Mount.By using 8V~17V supply voltage, it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.The allowable temperature range that this device can be operated in is -40°C~140°C TJ.Input type of Non-Inverting is used.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number UCC27201.The device is mounted using Surface Mount.There are 8 pins available in the device.Specification is for 12V supply voltage operation.In the maximum case, the output current can be 3A volts.Several electronic components are included in its subcategory of MOSFET Drivers.Components with 8 pins are available.Maximum (Bootstrap) voltage is 120V.Mosfet driver is based on a basis of 2 outputs that have been integrated.This device supports a current output of 3A at the output.The maximum power dissipation of 3.3W shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 5.5mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 12V.By increasing the frequency of 1MHz, efficiency can be improved.
UCC27201DRMT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 3.3W
UCC27201DRMT Applications
There are a lot of Texas Instruments UCC27201DRMT gate drivers applications.
- 3-Phase Motor Inverter Driver
- Solar inverters
- Portable computers
- Isolated Supplies for Motor Control
- Telecom switch mode power supplies
- Motor controllers
- High-voltage isolated DC-DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable Media Players
