UCC27201DRMTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 8 |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 140°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Pin Count | 8 |
| Max Output Current | 3mA |
| Operating Supply Voltage | 12V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 8V |
| Power Dissipation-Max | 3.3W |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 3.3W |
| Max Supply Current | 5.5mA |
| Current - Output | 3A |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Built-in Protections | UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height | 900μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
UCC27201DRMTG4 Overview
The packaging method is indicated by Tape and Reel.This configuration includes 2 drivers.As a result of its configuration, it contains a maximum of 8 terminations.Devices are mounted by Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 12V volts of power.As its interface IC, HALF BRIDGE BASED PERIPHERAL DRIVER is being employed.An output current as high as 3mA can be achieved at maximum power.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 8 component pins.A maximum operating temperature of 140°C is permissible.The allowable minimum value of operating temperature is -40°C.To maintain higher stability, the supply current should always be 5.5mA.For operation, it requires a voltage of 17V.A supply voltage of 8V is the minimum value required to operate the device.Mosfet gate drivers is outputting a current of 3A.As a rule of thumb, the operating supply voltage should be set to 12V.By using the frequency 1MHz, we can increase efficiency.
UCC27201DRMTG4 Features
Embedded in the Tape and Reel package
2 drivers
8 pins
UCC27201DRMTG4 Applications
There are a lot of Texas Instruments UCC27201DRMTG4 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- High-speed communications
- Motor Drives
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High power buffers
- Portable Navigation Devices
- Line drivers
- DC-DC Converters
- High current laser/LED systems
- Industrial Modules
