UCC27201QDDARQ1
| Parameters | |
|---|---|
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 350ns |
| Fall Time (Typ) | 300 ns |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.7W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1GHz |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Max Output Current | 3mA |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 2.7W |
| Output Current | 3A |
| Max Supply Current | 5.5mA |
UCC27201QDDARQ1 Overview
In order to increase flexibility, the package 8-PowerSOIC (0.154, 3.90mm Width) is used.There is a package in the form of Tape & Reel (TR).This configuration includes 2 drivers.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 8V~17V.The gate type on this device is N-Channel MOSFET.In this device, temperatures must not exceed -40°C~140°C TJ.Input type of Non-Inverting is used.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number UCC27201.Mounting the device requires Surface Mount.Devices have 8 pins available.Specification is for 12V supply voltage operation.There is a maximum output current of 3mA that can be achieved.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 8 component pins is available.There can be a voltage up to 120V on the high-side (Bootstrap).Mosfet gate drivers supports a current output of 3A.Using 2.7W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.In order to ensure greater stability, it is recommended to keep the supply current at 5.5mA.In order to operate properly, the operating supply voltage should be set to 12V.A gate driver in this series is included in the Automotive, AEC-Q100 series.By increasing the frequency of 1GHz, efficiency can be improved.
UCC27201QDDARQ1 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W
Operating with the supply voltage of Automotive, AEC-Q100
UCC27201QDDARQ1 Applications
There are a lot of Texas Instruments UCC27201QDDARQ1 gate drivers applications.
- Portable computers
- Video amplifiers
- Pulse transformer drivers
- AC-DC Inverters
- Motor Controls
- Multicolor LED/laser displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated switch mode power supplies (SMPS)
- Smart Phones
- Commercial air-conditioning (CAC)
