UCC27210D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27210 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4A |
| Output Current | 4A |
| Max Supply Current | 4.3mA |
| Propagation Delay | 46 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 46 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 400 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7.2ns 5.5ns |
| Channel Type | Independent |
| Turn On Time | 0.6 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.4V 5.8V |
| Turn Off Time | 0.4 µs |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27210D Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is packaged in the way of Tube.There is a mounting bracket in the way of Surface Mount.A supply voltage of 8V~17V demonstrates its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~140°C TJ.The input type is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Under its base part number UCC27210, various related parts can be found.The mount method is Surface Mount.As a result, it is configured with 8 pins when it is designed.Specification is for 12V supply voltage operation.In the maximum case, the output current can be 4A volts.This subcategory of MOSFET Drivers has a number of useful electronic components.The number of component pins is 8.High-side voltage - Max (Bootstrap) can be as low as 120V.For its basis, 2 outputs are integrated.The output current supported by the device is 4A.To maintain higher stability, the supply current should always be 4.3mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
UCC27210D Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
UCC27210D Applications
There are a lot of Texas Instruments UCC27210D gate drivers applications.
- High frequency line drivers
- DC-DC Converters
- A/D drivers
- Uninterruptible Power Supplies (UPS)
- Digitally controlled power supplies
- Motor Controls
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- Line drivers
- Industrial Power Supplies
