UCC27210DDAR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27210 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4A |
| Output Current | 4A |
| Max Supply Current | 4.3mA |
| Propagation Delay | 46 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 46 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 400 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7.2ns 5.5ns |
| Channel Type | Independent |
| Turn On Time | 0.6 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.4V 5.9V |
| Turn Off Time | 0.4 µs |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
UCC27210DDAR Overview
Its 8-PowerSOIC (0.154, 3.90mm Width) package provides greater flexibility.Cut Tape (CT) represents the package.Surface Mount is mounted in the way of the device.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 8V~17V supply voltage.N-Channel MOSFET is the gate type used for this design.-40°C~140°C TJ is the allowed temperature range for this device.Input type of Non-Inverting is used.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number UCC27210.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.The device is specifically designed to function with a supply voltage of 12V V.As a maximum, there is 4.5A limit to the output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has 8 component pins.A boot strap voltage of 120V is the maximum possible high-side voltage.In terms of its basis, there are 2 outputs integrated.The output current supported by the device is 4A.To ensure high stability, the supply current should be kept at 4.3mA.The operating supply voltage should be set at 12V.
UCC27210DDAR Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
UCC27210DDAR Applications
There are a lot of Texas Instruments UCC27210DDAR gate drivers applications.
- High-speed communications
- Multicolor LED/laser displays
- Portable Navigation Devices
- Motor controllers
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Drives
- Video amplifiers
- Uninterruptible Power Supplies (UPS)
- Telecom switch mode power supplies
- Industrial Power Supplies
