UCC27210DPRR
| Parameters | |
|---|---|
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC27210 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 4.5A |
| Operating Supply Voltage | 17V |
| Nominal Supply Current | 4A |
| Output Current | 4A |
| Max Supply Current | 4.3mA |
| Input Type | Non-Inverting |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7.2ns 5.5ns |
| Channel Type | Independent |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.4V 5.8V |
| Turn Off Time | 0.4 μs |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 800μm |
UCC27210DPRR Overview
For greater flexibility, its 10-WDFN Exposed Pad package is used.A package of Tape & Reel (TR) has been used.Gate drivers is mounted in the way of Surface Mount.Using a 8V~17V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.As a result of its configuration, it contains a maximum of 10 terminations.You will find various related parts under the base part number UCC27210.You mount it with Surface Mount.During design, it is configured with 10 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.Mosfet driver is possible for the output current to be as low as 4.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.10 pins are present on the component.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 120V.In terms of its basis, there are 2 outputs integrated.This device is capable of delivering 4A current.For higher stability, the supply current should be kept at 4.3mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 17V volts.
UCC27210DPRR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 120V
UCC27210DPRR Applications
There are a lot of Texas Instruments UCC27210DPRR gate drivers applications.
- Industrial Power Supplies
- serial peripheral interface (SPI), I2C
- Solar power supplies
- DC/DC converters
- Commercial and agricultural vehicles (CAV)
- Motor Control
- Portable Media Players
- High frequency line drivers
- Industrial Motor Inverter - Power Tools, Robotics
- High-speed communications
