UCC27211DDA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27211 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4A |
| Output Current | 4A |
| Max Supply Current | 4.3mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 400 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7.2ns 5.5ns |
| Channel Type | Independent |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.3V 2.8V |
| Turn Off Time | 0.4 μs |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27211DDA Overview
In order to increase flexibility, the package 8-PowerSOIC (0.154, 3.90mm Width) is used.A packaging method of Tube is used.Its recommended mounting way is Surface Mount.WGate driversh a 8V~17V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.The input type for this program is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are various parts that can be found under its base part number UCC27211.The device is mounted using Surface Mount.A total of 8 pins are available on the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.In the maximum case, the output current can be 4A volts.There are several useful electronic components within its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.A high-side voltage can be set up to 120V (Bootstrap).For its basis, there are 2 outputs integrated.Mosfet driver supports an output current of 4A.To maintain higher stability, the supply current should always be 4.3mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
UCC27211DDA Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
UCC27211DDA Applications
There are a lot of Texas Instruments UCC27211DDA gate drivers applications.
- Portable computers
- Portable Media Players
- Head-up and Head mounted displays
- Industrial Power Supplies
- Motor controllers
- Topologies
- Motor Controls
- Telecom switch mode power supplies
- Smart Phones
- Portable Navigation Devices
